Powder Technol 2003, 135–136:65–75.CrossRef 10. Kwek JW, Vakararelski IU, Ng WK, Heng JYY, Tan RBH: selleck compound Novel parallel plate condenser for single particle electrostatic
force measurements in atomic force microscope. Colloids Surf Physicochem Eng Aspects 2011, 385:206–212.CrossRef 11. Harris B: The electric field. In University Physics. New York: John Wily & Sons, Inc; 1995:455–475. 12. Terris BD, Stern JE, Rugar D, Mamin HJ: Contact electrification using force microscopy. Phys Rev Lett 1989, 63:2669–2672.CrossRef 13. Mesquida P, Stemmer A: Attaching silica nanoparticles from suspension onto surface charge patterns generated by a conductive atomic force microscope tip. Adv Mater 2001, 13:1395–1398.CrossRef 14. Mesquida P, Knapp HF, Stemmer A: Charge writing on the nanometre scale in a fluorocarbon film. Surf Interface Anal
2002, 33:159–162.CrossRef 15. Hutter JL, Bechhoefer J: Calibration of atomic force microscope tips. Rev Sci Instrum 1993, 64:1868–1873.CrossRef 16. Kestelman VN, find more Pinchuk LS, Goldade VA: Electrets Engineering: Fundamentals and Applications. Boston: Kluwer Academic Publishers; 2000.CrossRef 17. Matsuyama T, Ohtsuka M, Yamamoto H: Measurement of force curve due to electrostatic charge on a single particle using atomic force microscope. KONA Powder Particle J 2008, 26:238–245. 18. ANSYS, Inc: ANSYS Maxwell. http://www.ansys.com/Products/Simulation+Technology/Electromagnetics/Electromechanical/ANSYS+Maxwell 19. Israelachvili JN: Contrasts between intermolecular, interparticle and intersurface forces. In Intermolecular and Surface Forces. San Diego: Academic; 1991:152–155.
Competing interests The Atorvastatin authors declare that they have no competing interests. Authors’ contributions JMC performed all the AFM measurements and wrote the manuscript. WYC carried out the Ansoft Maxwell simulation. FRC provided valuable discussions and helped in Ansoft Maxwell simulation. FGT is the principal investigator who helped in the analysis and interpretation of data and in drafting of the manuscript and its revisions. All authors read and approved the final manuscript.”
“Background Cyanide has numerous applications in industry such as chelating agent, electroplating, pharmaceuticals, and mining [1, 2]. This extensive use of cyanide results in the generation of a huge amount of cyanide waste and increases the cyanide spill risk to the environment [3, 4]. Thus, cyanide must be treated before discharging. Different protocols such as adsorption, complexation, and oxidation are used for abating cyanides [1, 2, 5–7]. The procedures other than oxidation give highly concentrated products in which toxic cyanides still exist [8, 9]. Highly powerful, economically method is the photocatalytic oxidation of cyanide, which has been demonstrated in several studies [10–17]. However, an MK-4827 inexpensive photocatalyst is needed for the economical removal of large quantities of cyanide.